Home » Essential Tips in Maintaining and Repairing your Roller Shutters

Essential Tips in Maintaining and Repairing your Roller Shutters

The primary reason why businesses and homeowners install roller shutters is to secure their premises. So, if they are not functioning correctly, it is essential to hire a reliable and experienced technician immediately. However, there are always some things you can do to keep your roller shutters in good condition. This way, you can avoid repairs and secure your property at all times.

The great thing about roller shutters is that you can customise their design according to your preferences and needs. What’s more, they require little maintenance and are easy to operate. As long as you keep them in good condition, you can continue to enjoy the benefits of your roller shutters for a long time. So, in this article, we will give you some tops in maintaining and repairing your rolling shutters.

Window Roller Shutters

Inspect the Condition of your Roller Shutters Regularly

One of the ways to prolong the life of your roller shutters is to perform regular check-ups. Make sure you look for any weakness or damage that may jeopardise your safety and put your premises at risk for forced entries. You should also watch out for signs of attempted burglaries, as well as safety mechanism fault and general wear and tear. If you are not sure what to look for or you have spotted significant damage to your roller door, make sure you contact a professional and have it checked out.

Do Not Forget to Clean your Roller Door

As debris and dirt build up on your roller shutter, they can hinder the door’s performance. As such, you will notice that it makes jerky movements or it does not open or close properly. If you want to prevent this from happening, you should clean the shutters once every three months. You can use a stiff bristled brush to remove the build-up inside the ventilation holes and tracks. After that, hose down the shutters. You can also mix warm water with mild detergent to thoroughly get rid of any grime. Get an absorbent cloth and wipe everything dry. Make sure you avoid using steel wool, scrapers, scrubbing brushes or any abrasive cleaners because they can damage the surface of the roller shutters.

Lubricate the Mechanisms Properly

Remember to apply grease on the rollers, bearings and guide rails. This way, you can keep the rolling mechanisms to operate smoothly. Moreover, you can keep them from rusting. By adequately lubricating your door, you can use it quickly and lower the need for replacement parts. Do not forget this maintenance step. After all, it is a common mistake to think that once you’ve installed the roller shutters, you do not need to do anything to maintain them. You must ensure that you always thoroughly grease the rollers on the shutters. Otherwise, they will eventually seize up, and you will have a difficult time opening and closing them.

Operate the Roller Shutters with Care

If you have a hand-operated roller shutter, make sure you use it sensibly. Avoid slamming the door against the ground. Doing so will loosen the screws and even snap the mechanisms. If you’re using an electronic roller door, handle the remote carefully. Having a damaged remote can jeopardise the security of your roller shutters.

Moreover, you will have to purchase a replacement remote. Also, remind everyone within the vicinity to handle and move around the roller shutters carefully. Make sure that they do not throw or bang anything against the door which can cause severe damages.

Address Issues Immediately

If you notice problems or damages on your rolling shutters, make sure you address them immediately. The fault may seem small at first, but it can worsen over time. If neglected, you can put the security of your premises at risk. Moreover, since a mechanical failure is likely, the door can seriously injure anyone operating it or even those just walking by.

It may be tempting to repair the issues on your own, but we advise against it. Keep in mind that every year, broken roller doors injure thousands of people every year. Performing DIY roller shutter repairs can be incredibly dangerous. For instance, if you have a remote-controlled door, there is a risk of electrical shock. If you are an amateur repairman, it will take days or even months before you can fully understand the technical components of your rolling shutters.

So, if you do not have the tools and experience to repair your door, we recommend calling a skilled technician immediately. When you hire a trusted roller shutter maintenance specialist, you can ensure that they will address the issues accordingly. They should be able to lubricate and replace the components connected to the door.

Contrary to popular belief, hiring a professional roller door technician is the cost-effective choice. Professionals are less likely to experiment with your rolling shutters to determine the cause of the issue. They understand the damages, and they will take appropriate action.

Follow: