Home » How To Get Rid Of Damp In Your Home 

How To Get Rid Of Damp In Your Home 

Structural and construction issues are the main causes of damp, but in a lot of cases, a mild damp issue can be resolved with some simple home maintenance and lifestyle changes. Left alone, damp can lead to rot, peeling paint and wallpaper, and destruction of treasured possessions. For serious issues seek expert help by searching for Basement Waterproofing Kingston or similar in your area and get professional advice. However, some proper home care can go a long way. These tips won’t cure every case of damp, but they could help to prevent it from forming.

Air Out Your Home Regularly

This is especially important if you don’t have the heating on much. It might seem counterproductive, but every damp proofing company will tell you that even if it’s cold, you need to let damp air out. People produce damp, so open your windows to let dampness out, even if the windows have trickle vents. 

Heat Every Room Of Your Home

Central heating is designed to be used as a system, and leaving some of your rooms unheated can lead to cold spots. These spots can then be more susceptible to dampness. You don’t need to have your heating on all the time, but if you often have recurring damp problems, think about how you’re using your heating. This being said, having the heating on constantly is expensive, and you’ll soon run out of gas or oil. If your home is heated by propane, head to a site like kellypropane.com to get your tank refilled, and use your heating little and often. This will keep your home at an even temperature, whereas if you have the heating on during the day but off during the night, it will take more gas to warm everything back up again in the morning. You’ll also find your windows covered in condensation, which will add to the damp problem, so it’s always better to use your heating in short bursts all day and night, rather than in long stretches of use and disuse.

Feel The Walls

A lot of people don’t notice damp problems until it starts to smell and cause mold. Checking the walls while you’re cleaning can help you to feel whether there’s any damp and treat problems before they get worse. Damp proofing companies can help you with this, such as https://advanceddamp.co.uk/

Make Sure Air Can Circulate

Don’t put furniture directly against your walls. Leave an air gap, and make sure you don’t overstuff cupboards so air can circulate around your home. 

Check Pipes, Drains, and Guttering

Make sure they aren’t blocked. Leaves and plants can lead to some leaks if you let them build up. 

Use Vents

Make sure your washing machine and tumble drier are externally vented. If they’re not, they’ll add moisture to your home every time you use them. 

Check Your Roof

Look out for missing roof tiles. Look in your lift too to make sure you don’t have any leaks. While you’re in the roof, check that your insulation is dry. If it wasn’t installed properly, it can lead to a damp problem. 

Lag Your Pipes

Lag your pipes to stop them freezing when the weather is cold. Unlagged pipes are also more likely to have issues with condensation, which can lead to dripping and damp. 

Check Window Frames

Check window frames for rot and peeling paint. Treat for damp as soon as you notice this happening to avoid more expensive repairs. Check for rot as well. If there’s no rot but you still have a damp window surround, it could be that mortar has fallen down the gap between the window frame and the wall. 

Don’t Dry Clothes On Your Radiators

Use an airer if you need to dry clothes indoors, and make sure you put it in a well-ventilated room. Open the window if you need to. 

Check Your Exterior Masonry

Check for peeling paint, cracked render, and other damage. If you notice any problems, you might need to repoint using a suitable render. A masonry protection cream can help to prevent rain from penetrating in.